|Page 1 of 1|
|Author:||paulrace [ Tue Sep 19, 2017 12:57 pm ]|
|Post subject:||Mouthpiece Questions|
A reader writes:
Concerning mouthpieces I have a Selmar Mark V1 Soprano and have been playing with the original c mouthpiece using a 3 1/2 Vandoren which for me run stiffer than any other brands. Been playing off and on for 40 years on the horn. Using a stiff reed any recommends for how big an opening I may like.
Thanks for getting in touch. My guess is that you have a C* mouthpiece, which is actually different from a C. Are you using a 3 1/2 reed because you like the tone or because they hold up better when played hard?
If you live in Frisco, you might be in a position to do what most people can't - try out other mouthpieces. If you're playing Jazz or Pop and you want a louder, brighter sound, I might recommend a metal mouthpiece. Unfortunately everybody's numbering system is a little different, but you could probably adjust easily to an E in Selmer if you're in practice. People who go to F or beyond tend to be professional players who are playing places they need to be very loud and who have built up serious lung power.
If you go to an E or greater, you might have to go back to #3 reeds until you're used to the bigger opening.
The best thing would be to try them out in a music store with your Selmer and a new box of reeds.
If you don't have access to new mouthpieces to try out, see if you can get a professional mouthpiece a couple steps up used for cheap. Even if it's not ideal, it will give you an idea of whether a new one is worth the investment.
The truth is that I DON'T play enough to get to the point where I would adjust easily to anything greater than an E, so I can't offer recommendations at that end of the spectrum. I use C* on everything, because that's what I'm used to, and I tend to play in situations where I don't need to be very loud. So I'm a bad example, I suppose.
Have a great day, and good luck with your choices.
|Page 1 of 1||All times are UTC - 5 hours [ DST ]|
|Powered by phpBB® Forum Software © phpBB Group